Remote Control Wall Switch for use with Dakota WR Receiver

Product Information

Remote Control Wall Switch for use with Dakota WR Receiver

A Remote Control wall socket designed to make it easy to turn a Dakota WR-Receiver On & OFF.

With a good 80 metres operation distance (line of sight).

Up to 16 remote controls can be used with any Intel-Switch.

Please see below the simple program steps to set match an Intel-Switch to the remote control:
1) Select the operating mode on the back of the Intel-Switch.
2) Plug the Intel-switch into a wall socket.
3) Press the learn button on the side of the Intel-Switch and hold while it flashes.
4) Activate the red button on the remote control, the light on the Intel-Switch will go out.
5) You have now programmed that Remote Control to the chosen Intel-switch & chosen operating mode.
6) Repeat the process for additional detectors.

Specification:
Input Power Supply: 230v AC.
Maximum Rating: 10A/240W
Size: 110 (L) x 70 (W) mm.
Depth: 40 mm (not including pins)
UK Sockets Only.

Remote Control Specification:
Size: 60 (L) x 35 (W) x 12 (D) mm.
Power Supply: 12v MN21 Battery.

If you are not sure, please contact us for friendly no obligation advice.

Find this model advertised for the UK at any reputable internet dealer for less... and we will beat that price!

Price: 42.75

• Tell a Friend