WG Wireless PIR Alarm System With Built In Dialer
Product Information
This very flexible and affordable Wireless PIR Alarm System comes with a built in Telephone Dialer, User Keypad, 1 x Remote Controls, 1 x PIR & 1 x Siren and can be used with up to 32 mixed detectors. A perfect Wireless Alarm for small buildings or as a starter alarm which can be added to in the future. The Alarm has the following features: 1) You can use up to 32 detectors & remote controls. 2) You can record your own personal message. 3) Battery Back Up. 4) Each Six zones can be independently programmed (choosing Delay, Instant, Home & Away). 5) Built in Keypad. 6) Optional Wireless Keypad. 7) Remote Operation (through telephone call using a standard telephone line). 8) Siren activation upon Telephone Line Failure. 9) Emergency Button. 10) It will contact each programmed telephone number up to 3 times when activated. Kit Includes: 1 x Control Panel with Built in Dialer. 1 x Transformer (standard 3-pin). 1 x Built in Back up Battery. 1 x Remote Control. 1 x Wired Siren. 1 x Wireless PIR. 1 x Telephone Cable. 1 x Manual. Receiver Specification: Size of Control Panel: 160 (W) x 100 (H) x 30 (D) mm. Zones: 6. Squak Feature: Yes (upon Arming & Disarming). Maximum Number of Detectors: 32. Programmable Zone Types: Instant - Delay - 24 hour - Home - Away - Temporary Disarmed. Siren Duration: 0 - 30 minutes (adjustable). Number of Telephone Numbers Programmable: 6. Number of Attempts to Telephone Numbers: 3 (or until pressing #) Record Function: Yes (10 seconds). Listen in Function: Yes. All Channels Fully Programmable. Siren: Wired (plugs into the control panel). 110 Db. Emergency Button: Yes. Frequency; 433 MHz. Power Supply: 3-Pin Transformer 9v DC. PIR Specification: Size: 110 (H) x 60 (W) x 45 (D) mm (without bracket). 70 mm deep with bracket. Detection Range:10 metres Distance x 110 Degrees. Power Suppy: 1 x PP3 Battery. Battery Life: Approximately 6 - 12 months (normal use). Mounting the PIR Sensor: The key to successful operation of any PIR sensor is choosing the correct location. A sensor mounted in a unsuitable location has the potential to cause false triggers and reduce performance. The main rules that should be followed are: 1) Mount the PIR into a corner of a room. 2) Avoid heat spots from bright lamps suddenly turning on or off. 3) Do not install immediately above a radiator. 4) Do not install in a glass roof conservatory. What To Do When the Alarm Calls Keyholders: Press * To Listen In. Press # To Stop Alarm Calling & Turn Off.
Find this model advertised for the UK at any reputable internet dealer for less... and we will beat that price!
Price: 71.85