WG Wireless Gas Sensor & Transmitter
Product Information
This Wireless Gas Sensor & Transmitter is designed to detect dangerous levels of Gas, LPG & Carbon Monoxide and can be used with all the WG Alarm receivers. The Gas Sensor is powered by a standard 3-pin 220v AC plug, and needs to be mounted high up in locations that need to be monitored. Kit Includes: 1 x Gas Monitor 1 x 3-pin Plug. Specification: Transmission Range: 100 metres (line of sight). Power Supply: 220/110 v AC. Type of Gas: Natural - Town - LPG - Carbon Monoxide. Size: 110 (H) x 70 (W) x 40 (D) mm. Colour: White. Length of Cable: 1 metre. Sensitivity: 10% LEL. As with all safety sensors, please test regularly and use it as a back up safety sensor only, it does not remove the need to follow all standard safety proceedures. Installation Tips: Installation should be according to gas weight. 1) For Natural & City Gas which is a bit lighter than air, the gas detector should be installed under a ceiling close to the gas source. Do not fit near steam. Do not position in a location prone to floating air. Do not position behind curtains or cupboards. Do not install in wet locations. We would recommend learning the Sensor into a 24 hour emergency zone on the alarm panel. Some Tips following Alarm Activation: Shut Gas Off. Open All Windows & Doors. Do not turn on Electric Appliances. Do not use any naked flames. Find Source of the Activation (only when safe to do so). Maintenance: Test once per week. Clean every 6 months (cut power first). Do not use water or spirits when cleaning. Phone & Postal orders welcome.
Find this model advertised for the UK at any reputable internet dealer for less... and we will beat that price!
Price: 23.95