Solar Powered Twin Beams Alarm & Dialer System
Product Information
Our solar powered wireless GSM twin beams alarm systems are designed to help secure a church roof application using the solar charged active twin beams and wireless GSM receiver that will send text messages out to up to three telephone numbers in the event of an activation. The GSM receiver can also be armed and disarmed by a remote text message or set automatically to turn on and off at the same time each day, this is a simple solution to avoid false alarms caused by birds at dusk & dawn. This system is supplied with the following parts with church roof applications especially in mind: 1 x GSM Wireless Receiver, (this can be located inside the bell tower, cellar or a nearby house). 1 x Set of 60 metre Twin Active Beams (our experience tells us that in most church applications there are one or two obvious areas that thieves would gain access to the roof, so where budgets are very tight it may be that only one area will be protected, further beams can be purchased at any time now or in the future). 1 x Remote Control (for activating the receiver). 1 x 110 Db wired siren (this plugs into the receiver). 1 x Plug in power supply for the GSM receiver. 2 x Additional solar panels (our experience tells us that church roofs are shady cold locations, and we strongly recommend using the additional solar panels to keep the twin beams charged up, as these additional beams are on a cable which so you can ensure they both face due South). The battery powered active security beams are kept charged up by the built-in solar panels and they will work for 30 days without any daylight! When the beams are activated they will transmit a wireless radio signal back to the receiver which can be up to 700 metres (1400 metres using a repeater) away, the GSM receiver will then send a text message out to between 1 - 3 telephone numbers reporting the activation, and if required activate an optional 110 Db siren. Our GSM Six Channel Receiver works by using a mobile phone sim card for remote locations that have no easy access to a working telephone line, it will send out a text message to up to 3 x pre-programmed numbers in the event of an activation from up to 8 x TB security or smoke detectors The receiver will send text messages to up to 3 telephone numbers upon activation, setting & unsetting (if required) or a mains power failure. It can be used as a silent alarm or together with a 105 Db siren which is simply plugged into the receiver, it can also send a text message upon setting and un-setting if required or can be programmed to automatically turn on & off at set times or by sending it a text message or using the built in keypad. It has the option for 'Home & Away' arming to allow for different requirements. Very simple to program and use by using the built in keypad or by sending the system a series of text messages. Supplied without a sim card as we recommend our customers use a network that has a good mobile phone reception at the location that is to be monitored. It will work with up to 8 x TB security detectors or smoke detectors and 24 remote controls for easy operation. To install the beams you have to attach them facing each other onto secure & stable wall or posts within 60 metres of each other. They will need lining up using a view finder (supplied) by simply using a screwdriver to move the sensors vertically & horizontally. The simple method of setting the system up from new is as follows: 1) Insert Valid Sim Card. 2) Mount or Desk Mount System. 3) Plus in the supplied transformer into a standard UK 13amp wall socket. 4) Turn the On/Off switch on. 5) Program the system using the built in keypad or by sending it a series of text messages (keypad is easiest). 6) Press the learn button on the rear of the receiver until a beep is heard. 7) Activate a chosen detector. 8) Repeat operation 6 & 7 for each detector. 9) Test by setting the alarm and activating. Receiver Specification: Size: 160 (W) x 110 (L) x 35 (D) mm. No of Telephone Numbers That Can Be Programmed: Max 3. Power Supply: Std UK 3 Pin Plug In Power Transformer. Back Up Battery: PP3. Exit Time: 30 seconds. Entry Time: Instant. Text Message For Alarm: Yes. Siren Activation: Yes or No. Built In Siren: No (plug in). Text Message For Setting: Yes (optional). Text Message For Un-Setting: Yes (optional). Automatic Setting or Un-Setting: Yes (optional). Setting By Sending A Text Message: Yes (optional). Text Message For Power Failure: Yes. Text Message For Power Going Back On: Yes. Text Message Interigation: Yes. Beam Specification: Size of beams: 180 (L) x 75 (W) x 85 (D) mm. Colour of beams: Black. Mounting method of beams: Wall or Pole. Charging method: Built-in solar panel (optional additional solar panels available). Size of built-in solar panel: 45 x 40 mm. Size of optional extra solar panel: 80 x 45 mm. Sensitivity Setting: High or Low (using jumper supplied) Frequency: 433 Mhz. Wireless Range: 700 metres (line of sight) 1400 metres (line of sight) using repeater. Detection Range: 60 metres max. Available Optional Extra's: Repeater: Mains or Solar. Additional Solar Panel with 5 metres of cable. Receiver's. Dialer. Siren: Solar & Mains. Warranty: 1 Full Year. Please call us for friendly, no obligation advice.
Find this model advertised for the UK at any reputable internet dealer for less... and we will beat that price!
Price: 508.00