Wireless Alarm System
Product Information This versatile and affordable GSM Wireless Alarm System B comes supplied with a Wireless PIR, Remote Control and plug in Strobe Siren, and can be used as a small complete GSM Alarm System or used as a base to build a system to suit your specific requirements, full list of accessories shown on the right hand side of this page. This is one of the best GSM Wireless Alarms we have seen with the following benifits: 1) Very simple to install. 2) Very simple to program (using the built in keypad). 3) Easy to operate & can be armed and disarmed by using the Built in Keypad, Remote Control, Text Message, Built in Timer). 4) 16 Wireless Channels & 8 Wired Channels. 5) All Channels can be set to different alarm modes to suit all types of applications. 6) Fully expandable now or in the future. 7) Optional Wireless Siren. 8) Unlimited number of Door, Gate & Roller Shutter Door Contacts can be used with each system. 9) Includes built in Power Failure (if set to ON during programming). 10) System Self Monitoring (if set to ON during programming). 11) The system will send 3 Text Messages and 5 Telephone Calls. 12) Remote Listen in Feature. 13) Optional aerial extension available for poor signal locations. 14) 4 minute output relay that can trigger lights. 15) 4 minute relay independant from alarm activations that can be triggered by the owner using a text message. The system communicates using a mobile phone sim card (not included), we recommend our customers use a sim card with a mobile phone network that has a good signal at the location of the alarm (pay as you go card or contract). Kit Includes: 1 x Control Panel. 1 x Power Lead. 1 x Remote Control (including battery). 1 x PIR (including battery). 1 x Wired Siren & Plug in Cable from the Receiver.. 1 x Manual. TIP: When programming the telephone & text numbers, please proceed the number with the country code (i.e. 0044 for the UK). Channel Specification: 11 x Wireless Channels that can be set to Full Arm, Home Arm. 3 x Wireless Channels that can be set to 24 hour mode. 1 x Wireless Channel that can be a Watchdog zone. 1 x Wireless Channel that can be a SOS zone. 5 x Wired Channels that can be set to Full Arm, Home Arm. 2 x Wired Channels that can be set to 24 hour mode. 1 x Wired Channel that can be used for SOS zone. Alarm Type Explanation: Full Alarm (all detectors armed). Home Alarm (chosen detectors armed). 24 hour Alarm (always armed, normally smoke detectors are used in this mode). Monitoring Mode (suitable for monitoring elderly patients). Timed Mode (automatically arms and disarms at set times). SOS Mode (panic button that triggers the dialer, but not the sirens). The system can be armed & disarmed by using: 1) Built in Keypad. 2) Remote Control (maximum of 5 per system). 3) Text Message. 4) Automatically Set Time. Receiver Specification: Specification: Size, not including aerial: 180 (w) x 120 (h) x 30 (d) mm. Power Supply: 12v DC (max 2amps). Delay Entry: Yes (optional & adjustable). Delay Exit: Yes (optional & adjustable). Emergency Input Triggers: Yes (optional & adjustable). Aerial Height: 115 mm. Weight: 550 grams. Outgoing Text Messages: 3. Outgoing Telephone Calls: 5. Power Failure Operation: Yes (after 30 minutes) optional. Watchdog Reporting Feature: Yes (optional). Input Triggers: 8 wired NO or NC. Two Way Communication: Yes. Arm & Disarm Method: Keypad. Remote Control. Text Message. Timed. Outputs: 12v DC 60 seconds. 240v AC @ 3amps for 4 minutes or until turned off if before (on activation). 240v AC @ 3amps (remote text trigger). 8 x Wired Trigger Inputs: You can choose all 8 trigger inputs to be NO or NC, these can be connected to Alarm Panels, Security Detectors etc, each 8 channels can be set to either standard setting or emergency settings. Delay Entry & Exit:You can select 0 - 90 seconds delay time between the GSM Auto-Dialer being triggered to it sending out the messages and telephone calls (any channel set to 24hr or SOS zone will trigger immediately). Power Failure:When selected during programming, this system will send a text message to the first user when their has been a power failure for 30 minutes and another one when the power is restored (this only works when the GSM Auto-Dialer is turned on and armed). Watchdog Reporting Feature:When selected during programming, the system will send a text message to the first SMS Alert Number stating system OK, the duration between these text messages can 0 - 240 hours (0 = OFF). Two Way Communication:You can use the GSM Auto-Dialer as a telephone if you call it and you can listen into the location when it calls you after activation. Arm & Disarm Method: The GSM Auto-Dialer needs to be turned on and armed for all input triggers with the exception of SOS & 24hour zones, this makes the unit very versatile. The system can be armed by: 1 x Built in Keypad. 2 x Remote Control. 3 x Text Message. 4 x Set Time (in programming). SIM CARD: You can use either pay as you go sim cards or contract sim cards with this system (not included), we recommend you use a network card that has a good signal at the location you intend to use it. Programming Method:Easy to use built in keypad. Power Supply 12v DC up to 2amps:This GSM Auto-Dialer works from 12v DC and can draw up to 2 amps if all the outputs are being used when the Alarm is dialing out, a lot of applications will not use all (or any) of the available outputs therefore will not draw anywhere near as much current. PIR Specification Size without bracket: 100 (H) x 60 (W) x 35 (D) mm (without bracket). Size with bracket: 60 mm deep with bracket. Detection Range: 12 metres Distance & 110 Degrees. Power Suppy: 1 x PP3 Battery. Battery Life: Approximately 1 year (normal use). Remote Control Specification: 55 (L) x 30 (W) x 10 (D) mm. Battery Life: 1 - 3 years (normal use). Battery Type: 12v MN27. Transmission Distance: 60 metres (line of sight). The system has fantastic communication including: 1) Text messages when triggered. 2) Call selected telephone numbers when called. 3) Owners can listen into the alarm panel when called. 4) The system can report to the main keyholder after a self check following a selected time span during programming (whilst in armed state). 5) The system can contact the main keyholder by text message when the power supply has failed for 30 minutes and again when the power comes back on again (selectable in the simple programming). 6) Optional Aerial Extension (suitable for locations with a poor mobile phone signal or when the receiver has been installed into a particular type of building, i.e. steel container. 7) Ability to send the system a text which will trigger a seperate output relay for you (perhaps to turn lights on before you get home etc). 8) 4 minute output relay that can trigger any other device including lights when the alarm has been activated. The system can trigger a strobe siren that plugs into the control panel and a wireless strobe siren that can be located up to 300 metres (line of sight) away, provided it is plugged into a standard plug socket or a 12v DC battery supply. Another benifit of this system is that you can use the wireless magnetic door, gate, roller shutter detectors in groups allowing you to have as many of these particular items on any one wireless channel as you ever need, there is NO LIMIT. If you cant find a wireless detector to suit your needs, then any type of wired alarm detector can be used with the hard wired inputs. If in doubt, please contact us for Friendly, No Obligation Advice !!.
Find this model advertised for the UK at any reputable internet dealer for less... and we will beat that price!
Price: 210.00